Clicky

Civil Engineering

Basic Principles Of Pile And Classifications Of The Pile Foundations

Basic Principles of Pile Foundations |Classifications Of The Pile Foundations |Classification of deep foundations in PDF |Classes of piles

Basic Principles Of Pile And Classifications Of The Pile Foundations

Today this article is about the basic principles of pile foundation. Introduction and types of pile foundation. Classification of deep foundations in PDF. Classes of piles. Classification of deep foundations. Basic Principles of Pile Foundations. Basic Principles Of Pile And Classifications Of The Pile Foundations

Introduction Of Pile

Shallow and deep foundations signify the relative depth of the soil on that building’s square measure. once the depth of a foundation is a smaller amount than the dimension of the footing and is smaller than 10 feet deep, it’s a shallow foundation. Shallow foundations square measure used once surface soils are sturdy enough to support the obligatory masses. If the depth of a foundation is over the dimension of the building foundation, it’s a deep foundation. Deep foundations square measure usually transfer building masses deeper into the bottom.

Basic Principles  of Pile Foundations

Conditions wherever deep foundations square measure used.Soil close to the surface that has comparatively weak bearing capacities (700 pounds per sq ft or less)
Soils close to the surface that contain expansive clays (shrink/swell soils)
Surface soils that square measure liable to being removed by erosion or scour

Classification of deep foundations

Deep foundations square measure classified into 3 categories

Pile foundations
Well foundations
Caisson foundations

Types of foundations Associate in Nursing basic mechanisms concerned within the classification of deep foundations square measure reviewed in our Fe Civil communicating review course for those making ready to become an engineer in coaching.

Pile foundations

A pile foundation is outlined as a series of columns created or inserted into the bottom to transmit masses to a lower level of dirt. A pile could be a long cylinder created of powerful material, like concrete. Piles square measure pushed into the bottom to act as a gradual support for structures designed on high of them. Piles transfer the masses from structures to laborious strata, rocks, or soil with high bearing capability. The piles support the structure by remaining solidly placed within the soil. As pile foundations square measure set within the soil, they’re additional tolerant to erosion and scour.

Installation of pile foundations

Piles square measure initial solid at ground level then beat or driven into the bottom employing a machine. A machine could be a machine that holds the pile vertically and hammers it into the bottom. Blows square measure continual by lifting a significant weight and dropping it on high of the pile. Piles ought to be beaten into the bottom till the refusal purpose is reached, that is that the purpose is wherever a pile can’t be driven into the soil any farther. the tactic of putting in a pile could be a major thought within the structural integrity of pile foundations. The driven-pile methodology is a perfect choice as a result of it least disturbs the supporting soil around the pile and ends up in the best bearing capability for every pile. Since each pile incorporates a zone of influence on the soil around it, piles should be spaced so much enough to exclude one another so the masses square measure distributed equally.

Classes of piles

Depending on their performance, piles square measure classified as bearing piles, friction piles, friction-cum-bearing piles, batter piles, guide piles, and sheet piles.

Based on the composition of materials, piles square measure classified as timber piles, concrete piles, sand piles, or steel piles.

1)Bearing piles

Bearing piles square measure driven into the bottom till a tough stratum is reached. Bearing piles rest on laborious strata and act as pillars to support the structure. Bearing piles permit vertical masses and transfer the building load to the laborious stratum beneath.

2)Friction piles

Friction piles square measure used once the soil is soft and there aren’t any laborious strata offered. These piles square measure long, and also the surfaces square measure rough to extend the expanse and increase resistance. They bear on the resistance between their outer surface and also the soil in grips. Friction piles don’t rest on laborious strata.

3)Batter piles

Batter piles square measure driven inclined to resist inclined masses.

4)Guide piles

Guide piles square measure employed in the formation of cofferdams to supply stable foundations for under-water construction.

Read More

  1. Applications Of Unfold Footing And Soil Pressure Distribution

  2. What Is The Cut Fill And Method To Calculate The Cut And Fill

  3. How To Calculate Distance And Bearing Between Coordinates

  4. How To Calculate The Bricks Quantity For The Room

  5. Calculate The Estimate Of The Soakage pit

Thanks For Reading Article Get More Information And Share With Others

JOIN US & LIKE MY OFFICIAL FACEBOOK PAGE 

Raja Numan

Hi, My name is Engr. Raja Numan author of Engineering Information Hub and I am a Civil Engineer by Profession and I've specialized in the field of Quantity Surveying, Land Surveying as QC Engineer in national and multinational companies of Pakistan & Saudi Arabia.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
error: Content is protected !!